►2-in-1 CO2 Laser & Blade Cutting Plotter
►Support contour cutting
►Professional designed stand type metal frame
► 820mm/1220mm/1570mm Max Cutting Width Available
► Vertical roller driving type Stepping motor
► Laser mode: Hollow, engraving, cutting, drawing
► With Artcut software
►Support material :Polyester film,Insulation card,Cardboard,Kraft paper,White card,ABS board (≤0.5mm),PVC (≤0.8mm),Double swatch(High-ntensity reflective film),Instant sticker,Clothing special stickers,silk banner foaming post
► Internal rotary style (Roland© standard type blade)
► Plotting pen: Standard water based ball point pen refill
► Plotting mode:Same as a general cutting plotter
► Min. character : Chinese character: 3mm; letter: 2mm; (varies depending on character font and media)
► Data transmission : 8 data bits, 0 parity bit, 1 stop bit
► Water-load protection (laser)
► Cutting speed: Min.10mm/S ~ Max. 800mm/S
► Cutting pressure: Min. 10g ~ Max. 500g（Knife mode）
► Repeat accuracy: 0.0127mm
► Language format: DM/PL compatible
► Interface type : Serial port/USB
► Total power :50W ~ 200W (depending on mode of operation)
► PC interface: RS232 serial port or USB
► Baud rate :38.4K
► Laser current range: 0-20mA
►Applicable material:Soft and thin nonmetal material, such as paperboard, cutting vinyl
►Application range: Apparel, label, outdoor signs, lamp-box, screen printing, car decoration, etc.
►Standard Accessory List :Stand,Roller,Feed bearing, Nylon pillar,75w Water pump,45w Air pump,Blade(3pcs),Blade holder,Pen holder,Power adapter, USB cable,Serial cable,Exhaust port,Back cover handle,User manual,Artcut sofware,Character library
